Avaya S8700 - Page 118

Alarms, Errors, and Troubleshooting
555-233-143
4-44 Issue 1 May 2002
■ The TN230X board should be shown in the correct slot.
■ Fields should have the following indicated values:
4. If the TN230X is inserted and shows a vintage number, enter test board
cabinetcarrierslot for this board on the S8700 Multi-Connect SAT, as
shown in Figure 4-23 (1b02) and Figure 4-24 (2a01).
Figure 4-23. Screen output for the test board 1b02 command
Figure 4-24. Screen output for the test board 2a01 command
Field Value
Board
Type
ATM PNC EI
Vintage
The TN230X vintage. If Vintage is no board, then
either the board is in the incorrect slot or board insertion
was not completed correctly. Refer to
‘‘Reseating and
Replacing Circuit Packs’’ on page 4-7
.
test board 1b02
TEST RESULTS
Port Maintenance Name Alt. Name Test No. Result Error Code
01B02 ATM-EI 316 PASS
01B02 ATM-EI 598 PASS
01B02 ATM-EI 1258 PASS
01B02 ATM-EI 241 PASS
01B02 ATM-EI 304 PASS
01B02 ATM-EI 1259 PASS
test board 2a01
TEST RESULTS
Port Maintenance Name Alt. Name Test No. Result Error Code
02A01 ATM-EI 316 PASS
02A01 ATM-EI 598 PASS
02A01 ATM-EI 1258 PASS
02A01 ATM-EI 241 PASS
02A01 ATM-EI 304 PASS
02A01 ATM-EI 1259 PASS