DIG-LINE (Digital Line)
Issue 1 May 2002
8-543555-233-143
Status of Parameter Downloads
The Status Station and Status Attendant forms display the current download
status of individual 84xx, 603, and 301B1 terminals in the Download Status
field. The possible download states are:
Possible reasons for a terminal not being downloaded include:
— Terminal is off-hook.
— Terminal detected a bad checksum.
— Terminal detected a bad or missing EEPROM (refer to hardware error log).
— Terminal is busy programming data from a previous PROGRAM message.
— Terminal is in the Programming Disabled state.
— Terminal is in the Local Program Options mode.
— Terminal is disconnected or out of service (use status station command).
Possible reasons for terminal being not downloaded include:
— Terminal is off-hook.
— Terminal detected a bad checksum.
— Terminal detected a bad or missing EEPROM (refer to hardware error log).
— Terminal is busy programming data from a previous PROGRAM message.
— Terminal is in the Programming Disabled state.
— Terminal is in the Local Program Options Mode.
— Terminal is disconnected or out of service (use status station command).
Status Explanation
Complete Terminal successfully downloaded sometime in the past.
Pending System waiting to download the terminal. This may require the
execution of a background periodic test which could take more than
an hour. A demand download as described above may also be used
to initiate an immediate download.
Not Applicable Not a programmable terminal.
To Next Page
Loading...
