ATM Tips
Issue 1 May 2002
4-55555-233-143
Complete the following steps:
1. Enter list sys-link on the S8700 Multi-Connect SAT. Figure 4-34 shows
the screen output.
Figure 4-34. List sys-link screen
Ensure that the fields have the following indicated values.
2. Enter show switch circuit
3. Enter table on the A500 console. Figure 4-35 shows the screen output.
Link Type/
Channel
One PACL to each TN230X in either a PPN or an EPN, and
one
EAL to each TN230X in an EPN.
State
up
list sys-link
SYSTEM LINKS INFORMATION
Location Link Type/ State Current Faulted Last Fault
Channel Path Path Recorded
02A0101 EAL up present present 12/06/1997 16:20
01B0202 PACL up present present 12/06/1997 16:17
02A0102 PACL up present present 12/06/1997 16:20
To Next Page
Loading...
