Maintenance-Object Repair Procedures
555-233-143
8-872 Issue 1 May 2002
Firmware Download Procedure
Use this procedure to upgrade the firmware image file on the TN2501AP circuit
pack.
NOTE:
The commands associated with downloading firmware require that the
Administer Features field is y on the Command Permissions Categories
screen (change permissions login).
Instructions
1. Ensure that the FTP session is set up properly.
2. At the FTP client type cd / and press
return.
This command moves you from the announcement directory (default for
FTP sessions) to the root directory (/) where firmware and other files are
located.
3. FTP the new firmware image file to the TN2501AP circuit pack using the
put command. The file extension on the firmware image filename is
required.
4. Ensure that the file is present by listing the contents of the root directory (/)
on the VAL circuit pack.
5. At the SAT, type change firmware download and press
return.
The Firmware Download screen (Screen 8-3) appears.
Screen 8-3. Firmware Download screen
change firmware download Page 1 of 1 Server (SPE) A
FIRMWARE DOWNLOAD
Source Board Location: 1b03
Firmware Image File Name: /firmware_file
Target Board Code: TN2501 Suffix: AP Firmware Vintage:
Schedule Download? y Remove Image File After Successful Download? y
Start Date/Time: / / : Stop Date/Time: / / :
Target Target Target Target Target
Location Location Location Location Location
1.1b03 11. 21. 31. 41.
2. 12. 22. 32. 42.
3. 13. 23. 33. 43.
4. 14. 24. 34. 44.
5. 15. 25. 35. 45.
6. 16. 26. 36. 46.
7. 17. 27. 37. 47.
8. 18. 28. 38. 48.
9. 19. 29. 39. 49.
10. 20. 30. 40. 50.
To Next Page
Loading...
