EasyManua.ls Logo

Avaya S8700 - Page 1599

Avaya S8700
2618 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
FW-DWNLD (Firmware Download)
Issue 1 May 2002
8-877555-233-143
Notes:
a. Error Type 257A log-only error indicating that a certain software
resource was not available. Such an error very seldom occurs and usually
produces a proc_err. However, in the firmware download feature, the file
cannot be downloaded and/or the schedule can also abort/fail. To resolve
the error, use the test firmware download command. The Aux Data
specifies the error that resulted from the resource not being available. See
the table below for more details.
b. Error Type 258A log-only error indicating that a source board related
error occurred. The download schedule can also abort/fail. To resolve the
error, use the command test firmware download. The Aux Data specifies
the error. See the table below for more details.
Aux
Data Description of Failure
1 Source board query failed Check for system wide problems, clear every error,
and retry the download.
2 Target board query failed Check for system wide problems, clear every error,
and retry the download.
3 Allocating resources failed Check for system wide problems, clear every
error, and retry the download.
4 Firmware Download Information table query failed Check for system wide
problems, clear every error, and retry the download.
5 Header message failed Check for system wide problems, clear every error,
and retry the download.
6 Download Map timer expired Check for system wide problems, clear every
error, and retry the download.
Continued on next page
Aux
Data Description of Failure
1 Download image file specified on the change firmware download screen
absent from the source board, use the list dir command to verify file systems
contents.
2 The image on the source board has an invalid header, retry then escalate.
3 Bad CRC on image file on source board, retry then escalate.
4 File name too long, rename then try again.
5 Invalid TN code on the change firmware download screen does not match
TN code of image on the source board. Verify screen, make sure the correct
image is being used.
Continued on next page

Table of Contents

Other manuals for Avaya S8700

Related product manuals