Maintenance-Object Repair Procedures
555-233-143
8-896 Issue 1 May 2002
MedPro Status Test (#1392)
This test is nondestructive.
This test determines if at least one media processor port exists that is in service,
and that serves the same region as the C-LAN that the signaling group uses. If at
least one exists and is in service, the test passes; otherwise, the test fails.
Table 8-343. Test #1392 MedPro Status Test
Error
Code
Tes t
Result Description / Recommendation
2100 ABORT The necessary system resources to execute the test could not be allocated.
1. Retry the command at 1-minute intervals up to 5 times.
2500 ABORT Internal system Error.
1. Retry the command at 1-minute intervals up to 3 times
FAIL No MEDPRO ports in this region are in service. Every session is down.
1. Execute test sig-group grp# and verify the result of the H.323 Signaling
Group Ping test (#1387). If the test continues to fail, escalate the problem.
If the test passes, wait for the sessions to come up.
PASS Every session on the ethernet link is up.
To Next Page
Loading...
