Avaya S8700 - Page 1789

MAPD-BD (MAPD Interface Circuit Pack TN802)
Issue 1 May 2002
8-1067555-233-143
Slip Alarm Inquiry Test (#144)
This test is meaningless for the TN802 MAPD circuit pack. Table 8-431 details
the test results.
NOTE:
The query for slips always returns a 0 count.
Misframe Alarm Inquiry Test (#145)
This test is meaningless for the TN802 MAPD circuit pack. Table 8-432 details
the test results.
NOTE:
The query for misframes always returns a 0 count.
Translation Update Test (#146)
The Translation Update test sends the circuit pack-level information to the MAPD
Interface circuit pack. Translation includes the following data administered for a
MAPD Interface circuit pack (report from display ds1 UUCSS command):
■ DS1 Link Length between two DS1 endpoints
■ Synchronization Source Control
■ All Zero Suppression
■ Framing Mode
■ Signaling Mode
■ Time Slot Number of the 697-Hz tone
■ Time Slot Number of the 700-Hz tone
Table 8-431. Slip Alarm Inquiry Test (#144) results
If Windows NT is up
on the TN802 When the switch confirms Slip alarm:
Y Test passes
N Test aborts with ABORT 2000 Error Code.
Table 8-432. Misframe Alarm Inquiry Test (#145) results
If Windows NT is up
on the TN802 When the switch confirms Misframe alarm:
Y Test passes
N Test aborts with ABORT 2000 Error Code.