Maintenance-Object Repair Procedures
555-233-143
8-1702 Issue 1 May 2002
e. Error code 5 does not indicate a current error condition. It indicates that
the number of Call Classifier ports (CLSFY-PT) service was below the
administered threshold, but is now equal to or greater than the threshold.
These errors are typically generated during boot time or other transitional
states when the ports are being brought into service.
f. The total number of Call Classifier ports (CLSFY-PT) currently in service is
below the administered threshold. To clear the alarm, see ‘‘Repair
Procedure for TTR-LEV’’ on page 8-1700.
g. There are currently no DTMR ports in service. To clear the alarm, see
‘‘Repair Procedure for TTR-LEV’’ on page 8-1700.
h. There are currently no GPTD ports in service. To clear the alarm, see
‘‘Repair Procedure for TTR-LEV’’ on page 8-1700.
i. There are currently no Call Classifier ports (CLSFY-PT) in service. To clear
the alarm, see ‘‘Repair Procedure for TTR-LEV’’ on page 8-1700.
To Next Page
Loading...
