Avaya S8700 - Page 696

Maintenance Commands
555-233-143
7-440 Issue 1 May 2002
Background?
Specifying y causes the tests to run in the background, freeing up the
terminal for other tasks. Error results are logged in the error log but not
displayed on the screen. This option is incompatible with the auto-page
and "continuously" options.
Failures?
Specifying y causes only failure results to be displayed on the screen.
All-ports?
Specifying y causes testing of all customer-translated line and trunk ports
and, for the following circuit packs, untranslated ports as well:
TN# Description TN# Description
TN413 Digital Line [G3r V2] TN753 Direct-Inward-Dial Trunk
TN417 Auxiliary Trunk [G3r V2] TN754 Digital Line
TN429 DIOD Trunk [G3r V2] TN754 Digital Line
TN436 DID Trunk [G3r V2] TN760C Tie Trunk
TN437 Tie Trunk [G3r V2] TN762 Hybrid Line
TN438 Central Office Trunk [G3r V2] TN762B Data Line
TN439 Tie Trunk [G3r V2] TN763C Auxiliary Trunk
TN447 Central Office Trunk [G3r V2] TN769 Analog Line with Message Waiting
TN458 Tie Trunk [G3r V2] TN784 Digital Line
TN459 DID Trunk [G3r V2] TN785 16-Port Analog Line
TN465 Central Office Trunk [G3r V2] TN2135 Italian 16-Port Analog Line [G3r V2]
TN467 8-Port Analog line [G3r V2] TN2136 Digital Line [G3r V2]
TN468 16-Port Analog line [G3r V2] TN2138 Central Office Trunk [G3r V2]
TN479 16-Port Analog line [G3r V2] TN2139 Direct Inward Dialing Trunk [G3r V2]
TN497 Tie Trunk [G3r V2] TN2140 Tie Trunk [G3r V2]
TN556 ISDN-BRI Line TN2144 Analog Line [G3r V2]
TN735 MET Line TN2146 Direct Inward Dialing Trunk [G3r V2]
TN742 8-Port Analog Line TN2147 Central Office Trunk [G3r V2]
TN746 16-Port Analog line TN2149 Analog Line [G3r V2]
TN747B Central Office Trunk TN2180 16-Port Analog line [G3r V2]
TN2312 IPSI