test hardware-group
Issue 1 May 2002
7-441555-233-143
Output
When the test is run in the foreground, test results are displayed in the normal
format. In addition, the message line displays a running count of the number of
maintenance objects already tested, the total number included in the tests,
percent completed and repetition count.
The following display shows a typical result when
test hardware-group system
is entered on an S8700 IP Connect system.
test hardware-group system Page 1 of 1
TEST HARDWARE-GROUP SELECTIONS
Select the desired options for the specified test.
Test sequence: short
Test repetition: repeat_____ count: 1
Output OPTIONS: HARDWARE OPTIONS:
Auto-page? n
All-ports? n
Background? n
Failures? n
est hardware-group system Page 1 of 1
TEST HARDWARE-GROUP SELECTIONS
Select the desired options for the specified test.
Test sequence: short
Test repetition: repeat count: 1
OUTPUT OPTIONS: HARDWARE OPTIONS:
Auto-page? n All-ports? n
Background? n
Failures? n
To Next Page
Loading...
