ANN-BD (Announcement Circuit Pack)
Issue 1 May 2002
8-127555-233-143
System Technician-Demanded Tests:
Descriptions and Error Codes
Always investigate tests in the order presented in the table below when inspecting
errors in the system. For example, by clearing error codes associated with the
Control Channel Looparound test (#52), you may also clear errors generated from
other tests in the testing sequence.
Order of Investigation
Short Test
Sequence
Long Test
Sequence D/ND
1
1. D = Destructive; ND = Nondestructive
Control Channel Looparound test (#52)
2
2. For results of these tests, see ‘‘XXX-BD (Common Port Circuit Pack)’’.
X ND
Angel-Speech Processor (SP) Handshake
test (#208)
X ND
Clock Match inquiry (#212) X X ND
Super Frame Match inquiry (#211) X X ND
140AY Looparound test (#210) X X ND
Announcement Checksum test (#209) X X ND
Network Processor Element (NPE) Audit test
(#50)
2
XND
SAKI test (#53)
2
XD
To Next Page
Loading...
