Baumuller b maXX BM3000 - Page 265

Description of the Software Modules and Parameters
Parameter manual b maXX BM3000
Document no.: 5.12001.07
265
of 820
4
124.8 Encoder 1 trigger digital input TP1 neg. edge angle
Angle Encoder 1 with triggering of measurement through falling edge at digital input TP1.
124.9 Encoder 1 trigger digital input TP2 pos. edge revolutions
Revolutions Encoder 1 with triggering of measurement through rising edge at digital input
TP2.
124.10 Encoder 1 trigger digital input TP2 pos. edge angle
Angle Encoder 1 with triggering of measurement through rising edge at digital input TP2.
124.11 Encoder 1 trigger digital input TP2 neg. edge revolutions
Revolutions Encoder 1 with triggering of measurement through falling edge at digital input
TP2.
124.12 Encoder 1 trigger digital input TP2 neg. edge angle
Angle Encoder 1 with triggering of measurement through falling edge at digital input TP2.
124.13 Encoder 1 trigger zero pulse pos. edge revolutions
Revolutions Encoder 1 with triggering of measurement through rising edge of Zero Pulse
of Encoder 1.
124.14 Encoder 1 trigger zero pulse pos. edge angle
Angle Encoder 1 with triggering of measurement through rising edge of Zero Pulse of En-
coder 1.
124.15 Encoder 1 trigger zero pulse neg. edge revolutions
Revolutions Encoder 1 with triggering of measurement through falling edge of Zero Pulse
of Encoder 1.