Baumuller b maXX BM3000 User Manual

Error descriptions
Parameter manual b maXX BM3000
Document no.: 5.12001.07 Baumüller Nürnberg GmbH
764
of 820
5.5
1533 Error while reading sync data of drive
controller
Error when adjusting the synchronization data with the settings in
the drive controller.
No response
1534 Overflow mailbox service Overflow during a fragmented mailbox service. No response
1535 Invalid mailbox size Error detected when checking the mailbox size. No response
1536 to 1555: see Application Manual SoE slave for BM2500/3300/5000 (5.14010)
1600 wrong driver handle transferred No response
1601 Open command on already opened
driver
No response
1602 Driver has already been opened No response
1603 ZERO pointer transferred No response
1604 Timeout with OS access No response
1605 Faulty checksum No response
1606 Response from device faulty No response
1607 invalid semaphore entered for waiting No response
1608 unexpected API status for active com-
mand
No response
1609 too many repetitions with Hiperface
®
protocol
No response
1610 Call-up option invalid No response
1611 unknown object indicated for reading or
writing
No response
1612 Error while initializing the driver No response
1613 the response data is too large for the
available buffer
No response
1700 Error code directly according to error
report from encoder
Pulse block
1701 Analog signals outside of specification
Calibration data are faulty
Rotary encoder: Analog signals outside of specification
Linear encoder: Calibration data are faulty
Pulse block
1702 Internal angle offset faulty Pulse block
1703 Table for data field partitioning
destroyed
Pulse block
1704 Analog limit values not available Pulse block
1705 Internal I2C bus not functional Pulse block
1706 Internal checksum error Pulse block
1707 Encoder reset occurred through pro-
gram monitoring
Pulse block
1708 Counter overrun Pulse block
1709 Parity error Pulse block
1710 Checksum of transferred data is wrong Pulse block
1711 Unknown command code Pulse block
1712 Amount of transferred data wrong Pulse block
1713 Transferred command argument not
permitted
Pulse block
1714 The selected data field may not be writ-
ten to
Pulse block
1715 Wrong access code Pulse block
Error
num-
ber
Brief error text Error description Default set-
ting for
Error
Response

Baumuller b maXX BM3000 Specifications

General

Brand	Baumuller
Model	b maXX BM3000
Category	Measuring Instruments
Language	English