Configuration
Parameter manual b maXX BM3000
Document no.: 5.12001.07 Baumüller Nürnberg GmbH
98
of 820
4.4
129.24 Time phase error
Maximum time for which the drive can be operated at nominal current with a phase failure.
See also
Z130.24–.
129.25 Current phase error
If Bit 2 of the Supply Mode parameter (Z130.10–) is not set:
Maximum current at which the drive can be operated with a phase failure.
129.26 Max. heat sink temperature
Switch-off threshold for heat sink temperature
129.27 Max interior temperature
Switch-off threshold for the internal temperature of the power unit
129.41 Max. ground current
Monitoring the maximum ground current
129.42 Min. DC link voltage
Monitoring the minimum DC-Link Voltage
129.49 Amp article number
Article number of the power unit, not of the complete unit.
To Next Page
Loading...
Need help?
General