Belanger FreeStyler - Page 7

INSTALLATION AND STARTUP
1MANUL220 Belanger, Inc.® * PO BOX 5470. * Northville, MI 48167-5470 * Ph (248) 349-7010 * Fax (248) 380-9681
Rev
Release
Date
Page
Description
4-53
Added callout for Cord Grip location
Added the following note: The images in this section show the motors mounted with
the optional motor covers.
4-54
In step 4 changed “both” to “the”
Added Optional Motor Cover to image
4-56
Added to Step 8, as shown above in the image in step 4
4-59 to 4-60
No Content Change – Loading Top Wheel Neo-Tex™ is the Standard offering, so it
was relocated to before optional Loading Top Wheel Whisper Wheel®
4-61 to 4-66
Loading Top Wheel Whisper Wheel® updated per current practices
4-61
Quick Fill image was 11 fill packs with clamp assemblies, now is 12 fill packs with 2
compression cap assemblies. In parts Required: Compression Cap was Clamp,
Hardware updated accordingly and
42-1/4” Weight was 48” weight.
4-62
Updated images per current practices.
4-62 to 4-64
Updated procedure for disassembly of Compression Cap and new style material hub
and updated images per current practices.
4-65
Updated Installing the Cleaning Material images and procedure per current
practices. In Step 1 Compression Cap was Clamp. In Steps 2 and 3, 12 was 11 and
8 was 7 in the note.
4-66
Updated Installing the Weight Bars images and procedure per current practices. In
step 1 42-1/4” was 48” and 5/8” was 3/4".
4-67
Updated image of Entrance Wheel with Neo-Tex
™
added more fill information
4-68
Removed page for Loading Entrance Wheel Neo-Tex
™
with Nylon Brush
Chap 5
New information added to update to current practices
5-1
Changed subheading from Photo-Eye Available Styles to Photo-Eye Available Style
Options
Added “Add-on” to the subheading: Photo Eye Available Add-on Options
Removed the sentence: The standard FreeStyler® configuration has a set of Photo-
Eyes to install at the entrance of the bay.
Chap 6
Was Chapter 7 in Rev 13. Added images and updated per current practices.
Removed “Vector” reference in the Treadle/Y-Section step
Chap 7
New Chapter added to manual - Chemical Delivery and Pumping Station
Chap 7
Removed information for the Optional Super Heat Water Heater Installation,
Connections and Wiring Schematic
Chap 8
New Chapter added to manual - MixStir® Options
Chap 9
New Chapter added to manual - Reclaim Water Adapter Kit Option
Chap 10
New Chapter added to manual - Booster Pump Assembly Option, existing
information was in Chapter 9 of Rev 13, new information updated to current
practices
Chap 11
New Chapter added to manual - Bug Spray Applicator Option, existing information
was in Chapter 9 of Rev 13, new information updated to current practices
Chap 12
Was Chapter 6 of Rev 13, new information updated to current practices
Chap 12
Removed installation information on the Rocker Blaster and Rocker Spin Clean.
Chap 13
New Chapter added to manual - Water Softener Option, existing information was in
Chapter 9 of Rev 13, new information updated to current practices
Added Water Softener Conversion Charts
Chap 14
New Chapter added to manual - HydroBlade® Assembly Option, existing
information was in Chapter 9 of Rev 13, new information updated to current
practices
Chap 15
New Chapter added to manual - Wheel Cleaning and Chemical Tire Application
Options, existing information was in Chapter 9 of Rev 13, new information updated
to current practices
Chap 16
New Chapter added to manual – Signage Options
Chap 17
Was Chapter 8 in Rev 13. Added images and updated per current practices
17-1
Removed reference to Blow Off in General Information and removed Onboard Dryer
Blowoff section that was in Chapter 8 of rev 13.