3-41
Confidential
■ Error code 9A
No paper in manual feed slot (The manual paper actuator is not turned ON.)
No paper is inserted on the manual feed slot when drum cleaning is executed.
(The manual paper actuator is not turned ON.)
<User Check>
- Insert a paper into the manual feed slot.
■ Error code 9F
No paper while printing
<User Check>
- Load the paper into the paper tray.
Manual Feed
Load <size> Paper.
Drum Cleaning
Insert the blank paper into the Manual feed slot.
Step Cause Remedy
1 Harness connection failure of
manual sensor PCB ASSY
Check the harness connection of the
manual sensor PCB ASSY and reconnect it.
2 Manual sensor failure Check the sensor performance following
the procedure described in “Function code
32”. If any problem occurs, replace the
manual sensor PCB ASSY.
3 Registration front/rear sensor
PCB failure
Replace the registration front/rear sensor
PCB ASSY.
4 HVPS control PCB failure Replace the HVPS control PCB ASSY.
5 Main PCB failure Replace the main PCB ASSY.
No Paper
Load <size> paper, then press Start.
To Next Page
Loading...
Need help?
General
