4
Press ▲ or ▼ to select Erase HDD Data, and then press the OK button.
5
Press ▲ or ▼ to select High Speed, Secure High Spd., or Secure, and then press the OK button to dis-
play the confirmation screen.
Note
• If a password has been set on the printer, the Admin.Pswd screen is displayed. In this case, enter the pass-
word and press the OK button to go to the next step.
• As for the time required for deletion, confirm it on the Control Panel. However, when High Speed is selected,
this finishes in several seconds.
6
Press ▲ or ▼ to select Yes, and then press the OK button to start erasure.
After the printer hard disk is erased, the printer automatically restarts.
Erasing Data on the Printer's Hard Disk
iPF6400S
User's Guide
Printer Parts Hard Disk
614
To Next Page
Loading...
