8
Click D Advanced Settings to switch the print mode.
9
Click Image in the E Print Priority list.
10
Click High (600dpi) in the F Print Quality list.
Note
• Options displayed in the F Print Quality list vary depending on the paper type.
11
Click Monochrome in the H Color Mode list.
12
To adjust the brightness and contrast, click I Set.
Note
• For instructions on adjusting brightness and contrast, see "Adjusting the Color in the Printer Driver." ➔ P.51
13
Access the Page Setup pane.
14
Confirm the settings of A Paper Source and C Page Size.
15
Confirm the print settings, and then click M Print to start printing.
Note
• For tips on confirming print settings, see "Confirming Print Settings ." ➔ P.321
Choosing the Document Type and Printing Conditions (Mac OS)
iPF6400S
User's Guide
Enhanced Printing Options Adjusting Images
62
To Next Page
Loading...
