Using the Control Panel
1
On the Tab Selection screen of the Control Panel, press ◀ or ▶ to
select the Job tab ( ).
Note
• If the Tab Selection screen is not displayed, press the Menu button.
2
Press the OK button.
The Job Menu is displayed.
3
Press ▲ or ▼ to select Stored Job, and then press the OK button.
4
Press ▲ or ▼ to select the box number (in the range 00–29), and then press the OK button.
Note
• Enter a password if one has been set, and then press the OK button.
5
Press ▲ or ▼ to select Job List, and then press the OK button.
Using RemoteUI
On the Stored Job page, choose the box.
Note
• Enter a password if one has been set.
Displaying a List of Saved Jobs
iPF6400S
User's Guide
Print Job Management Advanced Print Job Operations
694
To Next Page