You can also configure whether or not to execute color calibration if the result of the color check exceeds the color
check threshold value.
Important
• The color check is not executed at the designated date and time if the printer is turned off.
• If the schedule settings are configured while the printer is in sleep mode, the schedule settings are applied when the
printer recovers from sleep mode. The color check will not be executed by the configured schedule unless the printer
recovers from sleep mode at least once.
Note
• This step can be executed when a printer that has a spectrophotometer unit installed is selected.
1
Open the Color Measurement sheet.
2
Select Schedule Settings from the Tools menu.
3
In the Schedule Settings dialog box, configure the set-
tings such as the date and time to execute the color check
and click the OK button.
Setting Item Details
Scheduling Select this check box to execute a color check at the date and time specified in Schedule.
Schedule Sets the date and time to execute the color check.
If When Printer Switched ON is selected, a color check is executed when the printer is
turned on.
Pattern Size To increase the precision of the color check, we recommend that you configure the same
setting as when Auto Adjust (High Precision) was executed in color calibration.
Calibration Select this check box to execute color calibration if the result of the color check exceeds the
value of ΔE configured in the Color Check Settings dialog box.
4
is displayed at the bottom left of the Color Measurement sheet.
This completes configuring the color check schedule.
iPF6400S
Scheduling Color Check
User's Guide
Color Management Color Calibration Management Console (Mac OS)
811
To Next Page
Loading...
