1
Choose Page Setup from the application menu to display the Page Attributes dialog box.
Note
•
The configuration method varies depending on the OS
and application software you are using.
If Page Setup is displayed in the application menu, the
settings are configured by opening the Page Attrib-
utes dialog box from Page Setup.
If it is not displayed, the settings are configured in the up-
per part of the printer driver displayed when you select
Print from the application software menu.
2
Select the printer in the B Format for list.
3
In the C Paper Size list, choose a paper size supported for borderless printing. Here, click 10"x12" - Bor-
derless.
Note
• Paper sizes supported for borderless printing are indicated by -Borderless.
4
Click F OK to close the dialog box.
5
In the application, create an original that takes up the entire space of the paper size.
6
Choose Print in the application menu.
7
Access the Main pane.
8
In the A Media Type list, select the type of paper that is loaded. In this case, click Canon Heavyweight
Coated Paper.
9
Select the print target in the E Print Target list.
Important
• When you are using paper that takes longer for ink to adhere for borderless printing and the Cutter Unit touch-
es printing surfaces that are not dry yet, it may damage the paper or the edge of the document that is cut,
depending on frequency of use. In this kind of situation, change the ink drying time in Between Pages in the
Paper Detailed Settings dialog box.
Borderless Printing at Actual Size (Mac OS)
iPF6400S
User's Guide
Enhanced Printing Options Printing at full size
82
To Next Page
Loading...
