Question Answer
When using the Spectro-
photometer Unit, which
of white or black should
be chosen in the White/
Black Backing Plate?
(See "Color Calibration Using the Spectrophotometer Unit (option).") ➔ P.742
(See "Color Checks Using the Spectrophotometer Unit (option).") ➔ P.745
•
If you are using paper that light passes through easily, we recommend that you select white.
•
If a color is used for one paper type that is different from the color that was used the previous time, it may
have an effect on the color measurement result.
If I am using the Spectro-
photometer Unit, can I
measure the colors of
any paper?
You might not be able to execute color measurement or might not be able to obtain the correct color measure-
ment results when using the following paper.
•
Colored paper
•
Paper where the surface is not even
•
Paper where the color density is low when printing
iPF6400S
Frequently Asked Questions
User's Guide
Troubleshooting Frequently Asked Questions
869
To Next Page
Loading...
