2. On 4.0L engines, install the transaxle-to-engine two outer lower bolts and torque to 60 N.m (44 ft. lbs.).
3. Install torque converter-to-driveplate bolts (1) and tighten to 88 N.m (65 ft. lbs.).
Fig. 197: Dust Shield
Courtesy of CHRYSLER LLC
4. Install torque converter dust shield and bolt tighten to 10 N.m (88 in. lbs.).
NOTE: The two transaxle-to-engine bolts next to the inspection cover will have a
exhaust bracket under them.
2009 Chrysler Town & Country LX
2009 AUTOMATIC TRANSMISSION 62TE - Service Information - Grand Caravan, Town & Country
steve
Monday, May 23, 2011 1:26:08 PM Page 123 © 2006 Mitchell Repair Information Company, LLC.
To Next Page
Loading...
