Cisco ASR 1002 Hardware Installation Guide

Cisco ASR 1000-ESP10
The encryption capability of the 10 Gbps ESP is rated for 4 Gbps whereas the 5 Gbps ESP is rated for 1.8
Gbps and the 2.5 Gbps ESP is rated for 1.0 Gbps. The ASR1000-ESP10-N has the same performance
characteristics as the ASR1000-ESP10 but does not support encryption services.
The Cisco ASR1000-ESP10 supports the following forwarding engines:
•
Cisco ASR1002-ESP-F
•
Cisco ASR1000-ESP10
• Cisco ASR1000-ESP10-N—The Cisco ASR1000 Embedded Services Processor 10G Non Crypto
Capable board provides an ASR 1000 series router solution for customers who are under export restrictions
and not qualified to implement products that support strong encryption services. The Cisco ASR1000
Embedded Services Processor 10G Non Crypto Capable feature support is the same as the Cisco
ASR100-ESP10 except that SSH, SSL and IPSec VPN services are not supported. For detailed information
about this feature, see Cisco ASR 1000 Series Aggregation Services Routers Software Configuration
Guide and Cisco ASR 1000 Embedded Services Processor 10G Non Crypto Capable Feature Guide.
The ASR1000-ESP10-N has the same performance characteristics as the ASR1000-ESP10 but does not support
encryption services.
Cisco ASR 1000-ESP20
Cisco ASR 1000-ESP20 supports the Cisco ASR 1006 Router and ASR 1004 Router. Performance highlights
of the Cisco ASR1000-ESP20 include hardware-assisted policing, encryption capability of 8 Gbps, and special
jitter- and latency-minimizing multicast packet replication.
Cisco ASR 1000-ESP20 supports 1Gb Cisco QuantumFlow Processor, 4Gb DRAM, 40Mb TCAM, and
256Mb packet buffer memory and high availability 1 + 1 redundancy in dual ESP configuration in combination
with the Cisco ASR 1006 Router.
Cisco ASR 1000-ESP40
Cisco ASR1000-ESP40 is a field-replaceable unit (FRU) capable of supporting online insertion and removal
(OIR) operation in conjunction with one or two route processors, a secondary forwarding processor, and up
to six SPA carrier cards.
Cisco ASR 1000-ESP40 is a CPP-based forwarding processor for the Cisco ASR1000 Series Routers. Cisco
ASR 1000-ESP40 is supported on the following routers:
•
Cisco ASR 1006 Router
•
Cisco ASR 1004 Router
•
Cisco ASR 1013 Router
The Cisco ASR1000-ESP40G supports:
•
ESI (enhanced serial interface) punt path support for dual redundant ASR 1000 route processors with a
bandwidth of 11 Gbps
Cisco ASR 1000 Series Router Hardware Installation Guide
89
Cisco ASR 1000 Series Routers Embedded Services Processors
Cisco ASR 1000-ESP10

Cisco ASR 1002 Specifications

General

Ethernet LAN	Yes
Cabling technology	10/100/1000Base-T(X)
Networking standards	IEEE 802.3
Ethernet LAN data rates	10, 100, 1000 Mbit/s
Ethernet interface type	Gigabit Ethernet
DHCP client	-
Supported network protocols	BGP, GRE, OSPF, DVMRP, EIGRP, IS-IS, IGMPv3, PIM-SM, PIM-SSM
Ethernet LAN (RJ-45) ports	4
Security algorithms	SSH
VPN tunnels quantity	8000
Safety	UL60950-1 CSA, C22.2 No. 60950-1-03, EN 60950-1, IEC 60950-1, AS/NZS 60950.1
Certification	FCC 47CFR15 Class A AS/NZS CISPR 22 CISPR 22 Class A EN55022 Class A ICES-003 Class A VCCI Class A CNS-13438 Class A EN61000-3-2 EN61000-3-3
Internal memory	4096 MB
AC input voltage	85 - 264 V
Power source type	AC
AC input frequency	50 - 60 Hz
Power consumption (typical)	560 W
Operating altitude	0 - 3048 m
Storage temperature (T-T)	0 - 50 °C
Operating temperature (T-T)	0 - 40 °C
Storage relative humidity (H-H)	5 - 95 %
Operating relative humidity (H-H)	5 - 90 %
Product color	Gray
Rack capacity	2U

Weight and Dimensions

Depth	461 mm
Width	437.4 mm
Height	89 mm
Weight	- g