Cisco ASR 1002 Hardware Installation Guide

is disabled
fru_name: ESP40
fru_slot: F0
hw_config: ASR-1004 chassis
Reason
The Product ID read from the FRU IDPROM is not supported in this hardware configuration.
Recommended action
Remove the Cisco ASR1000-ESP40 from the chassis.
Unsupported ASR1000-SIP Error Message
This section describes what happens when a Cisco ASR1000-SIP40 is present when the router is booting or
inserted at a later time into the Cisco ASR 1000 Router and provides the error message and explanation as to
why this occurred.
Error message
The ASR1000-SIP40 card is disabled and the following error message displays at the console.
Error message: %CMRP-3-UNSUPPORTED_FRU: [chars] in slot [chars] is not supported with [chars]
and so it is disabled
fru_name: SIP40
fru_slot: 0-1
hw_config: ASR-1004 chassis
Reason
The Product ID read from the FRU IDPROM is not supported in this hardware configuration.
Recommended action
Remove the Cisco ASR1000-SIP40 from the chassis.
Incompatible Cisco High Availability Hardware Configurations
The Cisco ASR 1006 Router hardware configuration for the High Availability feature is incompatible in Cisco
IOS XE Release 3.1S when you have the following hardware configuration combinations:
•
Cisco ASR100-RP1 with a Cisco ASR1000-ESP10 and a Cisco ASR1000-SIP10
•
Cisco ASR100-RP2 with a Cisco ASR1000-ESP20
Upgrading Existing Hardware Components to Support the Cisco ASR 1013
Router
Beginning with Cisco IOS XE Release 3.10S, Cisco ASR 1000 Series Routers have the capability to allow
users to perform upgrades in the field on programmable hardware devices. Field programmable hardware
devices include the Complex Programmable Logic Device (CPLD) and the field programmable gate array
(FPGA).
Cisco ASR 1000 Series Router Hardware Installation Guide
33
Cisco ASR 1000 Series Routers Component Overview
Upgrading Existing Hardware Components to Support the Cisco ASR 1013 Router

Cisco ASR 1002 Specifications

General

Ethernet LAN	Yes
Cabling technology	10/100/1000Base-T(X)
Networking standards	IEEE 802.3
Ethernet LAN data rates	10, 100, 1000 Mbit/s
Ethernet interface type	Gigabit Ethernet
DHCP client	-
Supported network protocols	BGP, GRE, OSPF, DVMRP, EIGRP, IS-IS, IGMPv3, PIM-SM, PIM-SSM
Ethernet LAN (RJ-45) ports	4
Security algorithms	SSH
VPN tunnels quantity	8000
Safety	UL60950-1 CSA, C22.2 No. 60950-1-03, EN 60950-1, IEC 60950-1, AS/NZS 60950.1
Certification	FCC 47CFR15 Class A AS/NZS CISPR 22 CISPR 22 Class A EN55022 Class A ICES-003 Class A VCCI Class A CNS-13438 Class A EN61000-3-2 EN61000-3-3
Internal memory	4096 MB
AC input voltage	85 - 264 V
Power source type	AC
AC input frequency	50 - 60 Hz
Power consumption (typical)	560 W
Operating altitude	0 - 3048 m
Storage temperature (T-T)	0 - 50 °C
Operating temperature (T-T)	0 - 40 °C
Storage relative humidity (H-H)	5 - 95 %
Operating relative humidity (H-H)	5 - 90 %
Product color	Gray
Rack capacity	2U

Weight and Dimensions

Depth	461 mm
Width	437.4 mm
Height	89 mm
Weight	- g