Cisco ASR 1002 Hardware Installation Guide

Site Selection Guidelines
The Cisco ASR 1000 Series Routers require specific environmental operating conditions. Temperature,
humidity, altitude, and vibration can affect the performance and reliability of the router. The following sections
provide specific information to help you plan for the proper operating environment.
The Cisco ASR 1000 Series Routers are designed to meet the industry EMC, safety, and environmental
standards described in the Regulatory Compliance and Safety Information for the Cisco ASR 1000 Series
Aggregation Services Routers document.
Site Environmental Requirements
Environmental monitoring in the Cisco ASR 1000 Series router protects the system and components from
damage caused by excessive voltage and temperature conditions. To ensure normal operation and avoid
unnecessary maintenance, plan and prepare your site configuration before installation. After installation, make
sure the site maintains the environmental characteristics as shown in the following table.
Table 40: Cisco ASR 1000 Series Router Environmental Tolerances
MaximumMinimumEnvironmental Characteristic
50 degree C
(50 degrees C at 10,000 feet)
0 degree CSteady State Operating
+70 degrees C
–20 degrees C
Storage
90%10%Humidity operating
(noncondensing)
95%5%Humidity nonoperating
(noncondensing)
10,000 feet
–500 feet
Altitude operating: over allowable
temperature range (0 to 50 degrees
C)
50,000 feet
–1000 feet
Altitude, nonoperating: over
allowable temperature range
+70 degrees C
–25 degrees C
Thermal shock non-operating with
change over time of 3 minute
+50 degrees C0 degrees CThermal Shock - Operating at 2.5
degree C per minute
Cisco ASR 1000 Series Router Hardware Installation Guide
119
Preparing Your Site for Installation
Site Selection Guidelines

Cisco ASR 1002 Specifications

General

Ethernet LAN	Yes
Cabling technology	10/100/1000Base-T(X)
Networking standards	IEEE 802.3
Ethernet LAN data rates	10, 100, 1000 Mbit/s
Ethernet interface type	Gigabit Ethernet
DHCP client	-
Supported network protocols	BGP, GRE, OSPF, DVMRP, EIGRP, IS-IS, IGMPv3, PIM-SM, PIM-SSM
Ethernet LAN (RJ-45) ports	4
Security algorithms	SSH
VPN tunnels quantity	8000
Safety	UL60950-1 CSA, C22.2 No. 60950-1-03, EN 60950-1, IEC 60950-1, AS/NZS 60950.1
Certification	FCC 47CFR15 Class A AS/NZS CISPR 22 CISPR 22 Class A EN55022 Class A ICES-003 Class A VCCI Class A CNS-13438 Class A EN61000-3-2 EN61000-3-3
Internal memory	4096 MB
AC input voltage	85 - 264 V
Power source type	AC
AC input frequency	50 - 60 Hz
Power consumption (typical)	560 W
Operating altitude	0 - 3048 m
Storage temperature (T-T)	0 - 50 °C
Operating temperature (T-T)	0 - 40 °C
Storage relative humidity (H-H)	5 - 95 %
Operating relative humidity (H-H)	5 - 90 %
Product color	Gray
Rack capacity	2U

Weight and Dimensions

Depth	461 mm
Width	437.4 mm
Height	89 mm
Weight	- g