Cisco ASR 1002 Hardware Installation Guide

CHAPTER 5
Preparing Your Site for Installation
This chapter contains important safety information you should know before working with the Cisco ASR
1000 Series Aggregation Services Routers and guides you through the process of preparing your site for
router installation.
This chapter contains the following sections:
•
Prerequisites and Preparation , page 111
•
Safety Guidelines , page 112
•
Compliance Requirements, page 113
•
Cautions and Regulatory Compliance Statements for NEBS , page 114
•
Standard Warning Statements, page 115
•
Site Planning, page 118
•
Preventing Electrostatic Discharge Damage, page 130
•
Electrical Safety, page 131
•
Receiving the Cisco ASR 1000 Series Router, page 132
•
Chassis-Lifting Guidelines, page 133
•
Tools and Equipment, page 134
•
Checking the Shipping Container Contents, page 135
•
Cisco ASR 1000 Series Router Installation Checklist, page 136
Prerequisites and Preparation
Before you perform any of the procedures in this guide, we recommend that you:
•
Read the safety guidelines in the next section and review the electrical safety and ESD-prevention
guidelines in this guide.
•
Ensure that you have all of the necessary tools and equipment (see Tools and Equipment, on page 134).
Cisco ASR 1000 Series Router Hardware Installation Guide
111

Cisco ASR 1002 Specifications

General

Ethernet LAN	Yes
Cabling technology	10/100/1000Base-T(X)
Networking standards	IEEE 802.3
Ethernet LAN data rates	10, 100, 1000 Mbit/s
Ethernet interface type	Gigabit Ethernet
DHCP client	-
Supported network protocols	BGP, GRE, OSPF, DVMRP, EIGRP, IS-IS, IGMPv3, PIM-SM, PIM-SSM
Ethernet LAN (RJ-45) ports	4
Security algorithms	SSH
VPN tunnels quantity	8000
Safety	UL60950-1 CSA, C22.2 No. 60950-1-03, EN 60950-1, IEC 60950-1, AS/NZS 60950.1
Certification	FCC 47CFR15 Class A AS/NZS CISPR 22 CISPR 22 Class A EN55022 Class A ICES-003 Class A VCCI Class A CNS-13438 Class A EN61000-3-2 EN61000-3-3
Internal memory	4096 MB
AC input voltage	85 - 264 V
Power source type	AC
AC input frequency	50 - 60 Hz
Power consumption (typical)	560 W
Operating altitude	0 - 3048 m
Storage temperature (T-T)	0 - 50 °C
Operating temperature (T-T)	0 - 40 °C
Storage relative humidity (H-H)	5 - 95 %
Operating relative humidity (H-H)	5 - 90 %
Product color	Gray
Rack capacity	2U

Weight and Dimensions

Depth	461 mm
Width	437.4 mm
Height	89 mm
Weight	- g