EasyManuals Logo
Home>Cisco>Network Router>ASR 1002

Cisco ASR 1002 Hardware Installation Guide

Cisco ASR 1002
702 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #138 background imageLoading...
Page #138 background image
Behavior DescriptionColorLEDLED Label
The Cisco ASR 1000
Series SPA Interface
Processor has
encountered an error
RedSystem statusSTATUS
Lit when the Cisco ASR
1000 Series SIP is loading
Yellow
The SPA drivers have
started and are running
and all critical processes
are running (as
determined by the Cisco
ASR 1000 Series SPA
Interface (SIP) Process
Manager).
Solid green
The Cisco ASR1002-SIP10 supports a built-in 4xGE SPA and three half-height SPAs (one half-height and
one full-height SPA). The Cisco ASR1002-SIP10 also functions as the base board for the Cisco embedded
ASR1000-RP1. The Cisco 1002 Router has one slot for FP0 with three subslots for SPAs, subslots 1 - 3.
SPA Interface Processor Slot Numbering
A shared port adapter is a modular type of port adapter that inserts into a subslot of a compatible SIP to provide
network connectivity and increased interface port density. The Cisco ASR 1000 Series SPA Interface Processor
(SIP) provides an aggregation function for SPAs.
Cisco ASR 1006 Router and Cisco ASR 1004 Router
In the Cisco ASR 1006 Router and Cisco ASR 1004 Router, the SIP supports:
Four half-height rate or full rate or combination)
Two full-height rate or full rate or combination) SPAs with up to 32 ports per SPA
Two half-height and 1 full-height combination that does not exceed 64 ports
The slot numbering for the SPAs in the Cisco ASR 1004 Router is the same as in the Cisco ASR 1006 Router.
Cisco ASR 1000 Series Router Hardware Installation Guide
104
Cisco ASR 1000 Series Router SPA Interface Processors (SIPs)
SPA Interface Processor Slot Numbering

Table of Contents

Other manuals for Cisco ASR 1002

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Cisco ASR 1002 and is the answer not in the manual?

Cisco ASR 1002 Specifications

General IconGeneral
Ethernet LANYes
Cabling technology10/100/1000Base-T(X)
Networking standardsIEEE 802.3
Ethernet LAN data rates10, 100, 1000 Mbit/s
Ethernet interface typeGigabit Ethernet
DHCP client-
Supported network protocolsBGP, GRE, OSPF, DVMRP, EIGRP, IS-IS, IGMPv3, PIM-SM, PIM-SSM
Ethernet LAN (RJ-45) ports4
Security algorithmsSSH
VPN tunnels quantity8000
SafetyUL60950-1 CSA, C22.2 No. 60950-1-03, EN 60950-1, IEC 60950-1, AS/NZS 60950.1
CertificationFCC 47CFR15 Class A AS/NZS CISPR 22 CISPR 22 Class A EN55022 Class A ICES-003 Class A VCCI Class A CNS-13438 Class A EN61000-3-2 EN61000-3-3
Internal memory4096 MB
AC input voltage85 - 264 V
Power source typeAC
AC input frequency50 - 60 Hz
Power consumption (typical)560 W
Operating altitude0 - 3048 m
Storage temperature (T-T)0 - 50 °C
Operating temperature (T-T)0 - 40 °C
Storage relative humidity (H-H)5 - 95 %
Operating relative humidity (H-H)5 - 90 %
Product colorGray
Rack capacity2U
Weight and Dimensions IconWeight and Dimensions
Depth461 mm
Width437.4 mm
Height89 mm
Weight- g

Related product manuals