Cisco ASR 1002 Hardware Installation Guide

CHAPTER 6
Cisco ASR 1006 Router Overview and Installation
This chapter describes the Cisco ASR 1006 Router and the procedures for installing the Cisco ASR 1006
Router on an equipment shelf or in equipment racks. It also describes how to connect interface and power
cables.
This chapter contains the following sections:
•
Cisco ASR 1006 Router Description, page 139
•
Installation Methods, page 143
•
General Rack Installation Guidelines, page 143
•
Guidelines for an Equipment Shelf or Tabletop Installation, page 145
•
Equipment Shelf or Tabletop Installation, page 146
•
Rack-Mounting the Cisco ASR 1006 Router, page 148
•
Attaching the Chassis Rack-Mount Brackets, page 149
•
Installing the Cisco ASR 1006 Router in a Rack, page 153
•
Attaching the Cable-Management Brackets, page 158
•
Attaching a Chassis Ground Connection, page 161
•
Connecting the Shared Port Adapter Cables, page 163
•
Connecting the Console and Auxiliary Port Cables, page 163
•
Connecting Power to the Cisco ASR 1006 Router, page 165
•
Connecting a Terminal to the Cisco ASR 1000 Series RP Console Port, page 176
•
Connecting the System Cables, page 179
•
Attaching Cable Retention Bracket on AC Power Supply, page 179
Cisco ASR 1006 Router Description
The Cisco ASR 1006 Router supports full-width card modules. It is designed with a single midplane with
connectors on one interface midplane. The Cisco ASR 1006 Router supports:
Cisco ASR 1000 Series Router Hardware Installation Guide
139

Cisco ASR 1002 Specifications

General

Ethernet LAN	Yes
Cabling technology	10/100/1000Base-T(X)
Networking standards	IEEE 802.3
Ethernet LAN data rates	10, 100, 1000 Mbit/s
Ethernet interface type	Gigabit Ethernet
DHCP client	-
Supported network protocols	BGP, GRE, OSPF, DVMRP, EIGRP, IS-IS, IGMPv3, PIM-SM, PIM-SSM
Ethernet LAN (RJ-45) ports	4
Security algorithms	SSH
VPN tunnels quantity	8000
Safety	UL60950-1 CSA, C22.2 No. 60950-1-03, EN 60950-1, IEC 60950-1, AS/NZS 60950.1
Certification	FCC 47CFR15 Class A AS/NZS CISPR 22 CISPR 22 Class A EN55022 Class A ICES-003 Class A VCCI Class A CNS-13438 Class A EN61000-3-2 EN61000-3-3
Internal memory	4096 MB
AC input voltage	85 - 264 V
Power source type	AC
AC input frequency	50 - 60 Hz
Power consumption (typical)	560 W
Operating altitude	0 - 3048 m
Storage temperature (T-T)	0 - 50 °C
Operating temperature (T-T)	0 - 40 °C
Storage relative humidity (H-H)	5 - 95 %
Operating relative humidity (H-H)	5 - 90 %
Product color	Gray
Rack capacity	2U

Weight and Dimensions

Depth	461 mm
Width	437.4 mm
Height	89 mm
Weight	- g