Cisco ASR 1002 Hardware Installation Guide

DETAILED STEPS
Step 1
Place the bottom packing material section inside the bottom of the shipping container.
Step 2
Use at least two people to place the Cisco ASR 1000 Series Router inside the container. Be sure that the chassis is
positioned correctly before you lower it inside the container.
Step 3
Place the top packing material over the top of the Cisco ASR 1000 Series Router.
Step 4
Place both accessory boxes inside the cutouts in the top section of the packing material.
Step 5
Fold the outside carton down over the top of the accessory boxes and seal with packing tape.
Step 6
Wrap two packaging straps tightly around the top and bottom of the package to hold the outside carton and the bottom
pallet.
Do not use tape to hold the outside carton to the bottom pallet. Packaging straps must be used.Caution
What to Do Next
This completes the procedure for repacking the shipping container.
Cisco ASR 1000 Series Router Hardware Installation Guide
613
Removing and Replacing FRUs from the Cisco ASR 1000 Series Routers
Repacking the Router

Cisco ASR 1002 Specifications

General

Ethernet LAN	Yes
Cabling technology	10/100/1000Base-T(X)
Networking standards	IEEE 802.3
Ethernet LAN data rates	10, 100, 1000 Mbit/s
Ethernet interface type	Gigabit Ethernet
DHCP client	-
Supported network protocols	BGP, GRE, OSPF, DVMRP, EIGRP, IS-IS, IGMPv3, PIM-SM, PIM-SSM
Ethernet LAN (RJ-45) ports	4
Security algorithms	SSH
VPN tunnels quantity	8000
Safety	UL60950-1 CSA, C22.2 No. 60950-1-03, EN 60950-1, IEC 60950-1, AS/NZS 60950.1
Certification	FCC 47CFR15 Class A AS/NZS CISPR 22 CISPR 22 Class A EN55022 Class A ICES-003 Class A VCCI Class A CNS-13438 Class A EN61000-3-2 EN61000-3-3
Internal memory	4096 MB
AC input voltage	85 - 264 V
Power source type	AC
AC input frequency	50 - 60 Hz
Power consumption (typical)	560 W
Operating altitude	0 - 3048 m
Storage temperature (T-T)	0 - 50 °C
Operating temperature (T-T)	0 - 40 °C
Storage relative humidity (H-H)	5 - 95 %
Operating relative humidity (H-H)	5 - 90 %
Product color	Gray
Rack capacity	2U

Weight and Dimensions

Depth	461 mm
Width	437.4 mm
Height	89 mm
Weight	- g