Compulite Dlite - Copying Parameter Levels from Scenes, Chase Steps, and Cues

88
Compulite
Chapter 5
Copying parameter levels from scenes, chase steps, and cues
You can copy fixtures and their parameter levels from lighting object to lighting object.
To copy parameter levels from a range of fixtures
Example: Copy levels from spots 1  3 in scene 2 and apply them to spots 4  6 in scene 5.
1 Press
COPY.
2 Press
SCENE and select scene 3.
3 Select spots 1  3.
4 Press
@.
5 Select spots 4  6.
6 Press
SCENE and select scene 5.
7 Press
ENTER or STORE or UPDATE.
The copied parameter levels are applied to the selected range of spots.
Pressing store, overwrites the scene or stores a new scene.
Press Update adds the new information to the selected scene.
To copy parameter bank levels from one fixture and apply to a range of fixtures
Example: Copy the color settings from spot 1 in scene 2 to spots 1  10 in scene 5.
1 Press
COPY.
2 Press
SCENE and select scene 2.
3 Select spot 1.
4 Press
SHIFT + C.
The levels for all parameters in the color bank are copied.
5 Select spots 1  10.
6 Press
SCENE and select scene 5.
7 Press
ENTER or STORE or UPDATE.
The copied levels are applied to the selected range of spots and stored.
Copy Copy to
Levels in a range of spots or channels A range of spots and channels
Levels in one spot or channel A range of spots or channels
Levels for a parameter type (F, C, B) The same bank for selected spots
Levels for selected parameters
Note: When copying pan and tilt
levels, the dimmer level is
automatically included.
The same parameter