Compulite Dlite - Copying Libraries

60
Tap number 5 on the touch screen.
Or
Press UK 5 with the faders in
Context mode.
The library is stored with all the parameters belonging to the beam bank.
To store libraries with active parameters only
Example: The device’s color bank includes cyan, magenta, yellow, color wheel 1, and color
wheel 2. When storing color library 5, grab only the parameters with level settings - cyan,
magenta, and yellow parameters.
1 Select fixtures.
2 Press
C and set levels for cyan, magenta, and yellow.
3 Press
STORE.
4 Press
LIB.
The touch screen grid displays the color libraries.
5 Tap
INCLUDE ALL to disable.
INCLUDE ALL appears on a pale field.
6 Press
C.
7 Choose number 5 on the keypad and press
ENTER.
Or
Tap number 5 on the touch screen.
Or
Press UK 5 with the faders in
Context mode.
The library includes the cyan, magenta, and yellow parameters. Color wheel 1 and color
wheel 2, also part of the color bank, are not stored in the library.
Copying libraries
You can copy libraries from existing libraries.
To copy libraries
Example: Copy C(olor library) 2 to C(olor library) 4.
1 Press
COPY.
2 Press
C for color libraries and select library 2.
3 Press
@.
4 Select color library
4.
5 Press
ENTER, or STORE, or tap OK.
Note: Confirmation is requested when overwriting.
6 If confirmation is requested, press
ENTER, or STORE, or tap OK again.