Compulite Dlite - Testing Dimmers

35
DLITE
Patching
4 Press PARK.
Or
Press
ENTER.
5 Tap
OK.
To unpark fixture parameters
1 Select the fixtures. Select the parameters you want to unpark.
2 Press
PARK.
The park options are displayed on the touch screen.
3 Tap
UNPARK.
The selected parameters are removed from their parked state.
4 Tap
OK to exit the park options screen.
To unpark DMX channels
1 Press
PARK.
The park options are displayed on the touch screen.
2 Tap
PARK DIMMER.
DMX port 1 or 2 is displayed on the touch screen grid.
3 If necessary, toggle
DMX PORT 2 to display the correct DMX port.
4 Select the DMX channels.
5 Tap
PARK.
6 Tap
OK to exit the park options screen.
To unpark everything
1 Press
PARK.
The park options are displayed on the touch screen.
2 Tap
UNPARK ALL.
3 Tap
OK to exit the park options screen.
Testing dimmers
You can test the DMX channels. In test mode, the selected dimmer is automatically set to 80%.
To test dimmers
1 Press
PARK.
2 Select a DMX address on the touch screen grid.
3 Tap
TEST.
The selected dimmer turns on at 80%.
4 Press
NEXT or PREV to cycle through the dimmers.