Compulite Dlite - Merge Levels to Update Cues

85
DLITE
Programming Lighting Objects
The selected lighting object is now active in the editor.
4 Select fixtures and set levels.
5 Optional - select store options or
INCLUDE/EXCLUDE parameters.
6 Press
ENTER, or UPDATE, or tap OK.
Tip! (FOR CHASE STEPS ONLY) Instead of pressing ENTER, or UPDATE, press
NEXT or PREV. The step is updated. The next or previous step is now ready for editing.
To update a range of scenes, cues, or chase steps
1 Select fixtures and set parameter levels.
2 Press
UPDATE.
3 To select the range of scenes: Press
SCENE # --> #.
To select the range of cues: Press
SHIFT + QLIST #, CUE # --> #.
To select the range of chase steps: Press
CHASE #, SHIFT + STEP # --> #.
4 Press
ENTER or tap OK.
The selected range is updated.
To release fixtures from lighting objects
1 To update scenes: Press
SCENE and select the scene.
To update cues: Press
QLIST and select the QList. Then press CUE and select the cue on
the keypad.
To update chase steps: Press
CHASE and select the chase. Then press STEP and select the
step on the keypad.
2 Press
CHANNEL, SPOT, or EXTRA to select fixtures.
The selected lighting object is now active in the editor.
3 Select the fixture(s).
4 Press
RELEASE or tap RELEASE on the touch screen.
5 Press
UPDATE.
The fixture is removed form the cue.
Merge levels to update cues
Update cues by merging editor levels to cues running on the crossfader. The updated levels track
through consecutive cues under the condition that the parameter level does not change. When
encountering a change in the parameter level, the update stops.
Example: