Compulite Dlite - Controlling Fade Rates

106
Compulite
Chapter 6
2 Tap SYSTEM OPTIONS.
3 Tap
BEHAVIOR.
4 Enable or disable
SLIDER GO OFF ZERO or PLAYBACK STOMP.
Controlling fade rates
Wheels 1, 2, and 3 provide override controls for fade rates on individual playbacks.
 Wheel 1, labelled RATE, controls the fade rate for scenes and chases.
 Wheel 2, labelled EFFECT, controls the fade rate for effects.
 Wheel 3, labelled% FADE controls the jump/fade percentage for chases.
Fade rates set using the wheels can be saved in snaps.
Fade rates for all playbacks can be controlled using the general master in its rate master mode.
To control fade rates
1 Press
RATE.
Wheel 1 is available to control fade rates.
2 Tap the playback on the touch screen or press the playback’s
SELECT key.
3 Turn wheel 1 to override the scene’s or chase’s fade rate.
The adjusted rate is displayed on the external monitor.
4 Press
RESET to exit rate mode.
5 Optional - update the snap to store the new fade rate. (see “Updating snaps” page 149).
To control fade rates with the general master
1 Press
RATE, which is located under the general master slider.
2 Use the slider to set the rate.
IMPORTANT! Using the general master as a rate master mode affects all playbacks
and the crossfader.
To reset the rate for all playbacks
1 Press
RATE.
2 Tap
RESET RATE.
All rates that have been changed are reset to 100%.
To reset the rate for selected playbacks
1 Press
RATE.
2 Press one or more
SELECT keys.
3 Tap
RESET RATE.