58
Compulite
Chapter 4
Storing libraries
To store libraries
Example: Store a position library 1 for spots 1 through 5.
1 Select spots
1 5.
2 Turn on the dimmer so you can see what you are doing.
3 Set the pan and tilt positions.
4 Press
STORE.
5 Press
LIB.
6 Press
F(ocus).
7 Choose number 1 on the keypad and press
ENTER.
Or
Tap number 1 on the touch screen grid.
Or
Press UK 1 with the faders in
Context mode.
Focus library 1 is stored and can be applied to fixtures when programming scenes, steps,
and cues.
Storing fixture or device libraries
Libraries can be stored as fixture libraries or device libraries.
Fixture - Library levels are specific to individual fixtures. The default for focus libraries is by
fixture.
Device - The library levels are specific to the type of device. The parameter levels for the first
fixture, of the device type, are stored in the library. These levels can be applied to any fixture
belonging to the same device type. The default for color and beam libraries is by device.
To store fixture libraries
Example: Store color library 5 for fixtures.
1 Select fixtures.
2 Press
C and set levels for the color parameters.
3 Press
STORE.
4 Press
LIB.
The touch screen grid displays the color libraries.
5 Make sure that
BY FIXTURE is enabled.
When enabled the button has a dark field.
6 Choose number 5 on the keypad and press
ENTER.
Or
To Next Page
Loading...