87
DLITE
Programming Lighting Objects
When overwriting, Dlite requests confirmation: the message Are you sure? is displayed.
6 Press
ENTER or tap OK again to confirm.
Copying, moving, deleting, and adding text tags
Copying lighting objects
Scenes, chase steps, and cues can be copied from existing objects to create new objects. All proper-
ties are copied, including: overall fade time, parameter fade times, loops, links, and text.
When copying objects, you first select the source object and then copy to the target object.
To copy a lighting object
Example: Copy object 1 to object 10.
1 Press
COPY.
2 To copy scenes: Press
SCENE and press 1.
To copy cues: Press
QLIST and select the QList. Then press CUE and press 1.
To copy chase steps: Press
CHASE and select the chase. Then press STEP and press 1.
3 Press
@.
4 Press
10 on the keypad.
5 Press
ENTER, or STORE.
Lighting object 10, a copy of the selected object 1, is stored.
Note: Confirmation is requested when overwriting.
6 If confirmation is requested, press
ENTER, or STORE, or tap OK again.
To copy a range of lighting objects
Example: Copy objects 1 3 to object 11 13.
1 Press
COPY.
2 To copy scenes: Press
SCENE and press 1 3.
To copy chase steps: Press
CHASE and select the chase. Then press STEP and press 1 3.
3 Press
@.
4 Press
11 on the keypad.
5 Press
ENTER, or STORE.
Lighting objects 11 13 are stored.
Note: Confirmation is requested when overwriting.
6 If confirmation is requested, press
ENTER, or STORE, or tap OK again.
To Next Page
Loading...