Compulite Dlite - Reversing Chase Direction; Setting Chases for Manual Operation; Programming Chases with Libraries

82
Compulite
Chapter 5
The Edit Chase screen is displayed.
3 Select the chase.
4 Tap
REWIND.
5 Press
STORE or UPDATE.
Reversing chase direction
Chase steps can run increment consecutively (step 1, 2, 3, etc.) or run in the opposite direction (step
3, 2, 1, etc.). You can reverse the direction and save the chase or reverse direction on-the-fly
(See “reverse chase direction on-the-fly” page 102).
To reverse chase direction
1 Press
EDIT.
2 Press
CHASE.
The
Edit Chase screen is displayed.
3 Select the chase.
4 Tap .
5 Press
STORE or UPDATE.
The chase now runs in the reverse direction.
Setting chases for manual operation
The default playback for chases is automatic fading from step to step. You can save chases as
manual operation chases or change to manual operation on-the-fly.
Manually operated chases require a go command to advance each step. Go commands are given by
pressing the flash key for the playback running the chase.
For manual operation on-the-fly, See “Chases on-the-fly” page 102.
To set and save a manual operation chase
1 Press
EDIT.
2 Press
CHASE.
The
Edit Chase screen is displayed.
3 Select the chase.
4 Tap
MANUAL.
5 Press
STORE or UPDATE or tap OK.
Now each press on the playback’s select key advances the chase by one step.
Programming chases with libraries
For programming scenes using libraries: See “Using libraries to program scenes, steps, and cues”
page 63.