Compulite Dlite - Overwriting Lighting Objects Via the Editor

86
Compulite
Chapter 5
To update cues by merging editor levels
1 Set the levels in the editor.
2 Press
UPDATE.
3 Press .
4 Optional: Select an end cue number to limit the update. Example: Enter cue number 6 here
to limit the update for cues 1  6.
5 Press
ENTER.
6 Parameter levels are updated in all the cues in the QList or in the range of cues as desig-
nated in step 4.
Overwriting lighting objects via the editor
To overwrite scenes, cues, or chase steps
Example: Update Scene 1, or QList 1- cue,1 or Chase 1- step 1.
1 Select fixtures and set levels.
2 Press
STORE.
3 To overwrite scenes: Press
SCENE and press 1 on the keypad or tap 1 on the touch screen.
To overwrite cues: Press
QLIST and press 1 and then press CUE and press 1 (on the editing
keypad).
To overwrite chase steps: Press
CHASE and press 1 and then press STEP and press 1 (on
the editing keypad).
4 Optional - select store options or
INCLUDE/EXCLUDE parameters. See “Excluding or
including parameters when storing objects” on page 158.
5 Press
ENTER or tap OK.
Cues Editor Cues after update
Cue 1: Channel 1 @ 50
Channel 2 @ 50
Channel 3 @ 50
Channel 4 @ 65
(Cue 1 is output on the crossfader) Channel 1 @ 40
Channel 2 @ 40
Channel 3 @ 40
Channel 4 @ 85
Cue 1: Channel 1 @ 40
Channel 2 @ 40
Channel 3 @ 40
Channel 4 @ 85
Cue 2: Channel 1 @ 50
Channel 2 @ 50
Channel 3 @ 30
Channel 4 @ 75
Cue 2: Channel 1 @ 40
Channel 2 @ 40
Channel 3 @ 30
Channel 4 @ 75
Cue 3: Channel 1 @ 50
Channel 2 @ 50
Channel 3 @ 20
Channel 4 @ 65
Cue 3: Channel 1 @ 40
Channel 2 @ 40
Channel 3 @ 20
Channel 4 @ 65