Compulite Dlite - Moving Lighting Objects

90
Compulite
Chapter 5
5 Press ENTER.
The levels for x and y are copied to the selected spots.
To copy and paste all levels from a parameter bank
Example: Scenes 1  3 are output from faders. Copy the all color bank levels from spot 1 to
spots 10  15.
1 Press
COPY.
2 Press
SPOT and select spot 1.
3 Press
SHIFT + COLOR.
4 Press
SPOT and select spots 10  15.
5 Press
ENTER.
All color bank levels are copied to the selected spots.
To copy levels from the editor
Example: Copy editor levels for x and y from spot 1 to spot 2.
1 Press
COPY.
2 Press
SPOT and select spot 1.
3 Press
@.
4 Press
SPOT and select spot 2.
5 Press
ENTER.
The editor levels for x and y are copied to the selected spot.
Moving lighting objects
Move scenes, cues, or chase steps by to a new number.
To move a lighting object
Example: Move object 1 to object 11.
1 Press
SHIFT + MOVE.
2 To move scenes: Press
SCENE and press 1.
To move cues: Press
QLIST and select the QList. Then press CUE and press 1.
To move chase steps: Press
CHASE and select the chase. Then press STEP and press 1
3 Press @.
4 Press
11 on the keypad and press ENTER or STORE.
Or
Tap cell 11 on the touch screen.
Lighting object 1 is now lighting object 11.
Note: Confirmation is requested when overwriting.
5 If confirmation is requested, press
ENTER or STORE.