Compulite Dlite - Testing Fixtures

36
Compulite
Chapter 2
5 Press RESET to exit.
OR
1 Press
DIM and select a dimmer number.
The patch is displayed on the external monitor.
2 Press
SHIFT + PARK.
The park screen is displayed.
TEST is selected.
Dimmer 1 is turned on at 80%. All other dimmers are forced to zero.
3 Press
PREV or NEXT to cycle through the dimmers.
4 Exit by pressing
RESET or clicking OK.
Testing fixtures
Test the dimmers for selected fixtures. Use wheel 1 to set the dimmer testing level.
To set the test level
1 Select a fixture.
2 Press
SHIFT + TEST.
3 Use wheel 1 to set a dimmer level.
4 Use
NEXT and PREV to cycle through the fixtures.
OR
1 Press
SHIFT + TEST.
2 Select a fixture.
3 Use wheel 1 to set a dimmer level.
4 Use
NEXT and PREV to cycle through the fixtures.