79
DLITE
Programming Lighting Objects
Each time you press the UK, the next step is saved. Dlite increments the current step by 1.
To store specific steps
Example: Store step 12 in chase 1.
1 Select fixtures and set levels.
2 Press
STORE.
3 Press
CHASE.
4 Select chase 1 on the keypad.
5 Press
SHIFT + STEP.
The chase steps are displayed on the touch screen grid. Dlite prompts for a step number.
6 Enter
12 on the keypad and press ENTER or STORE.
Or
Tap step 12 on the touch screen grid.
Or
With the faders in
Context mode, press UK 12.
The editor is stored as step 12.
Inserting chase steps
Inserted steps replace the original step and the original step is bumped to the next step number.
Example: Chase 1 has 5 steps. You want to insert a step between steps 2 and 3. Store the inserted
step as step 3. The original step 3 is now step 4, step 4 becomes step 5, step 5 becomes step 6.
To insert steps
Example: Add a step, between steps 2 and 3, to chase 1.
1 Select fixtures and set levels.
2 Press
EDIT.
3 Press
CHASE.
4 Select chase 1 on the keypad.
5 Tap
INSERT STEP and tap cell 3.
Or
If you choose the step number on the keypad, press
UPDATE or STORE or ENTER.
The editor is stored as step 3. The original step 3 is bumped to step 4 and any subsequent
steps are also bumped to the next step number.
Changing step order
You can swap steps within the same chase or between different chases.
To Next Page
Loading...