Compulite Dlite - Deleting Lighting Objects; Adding Text Tags to Lighting Objects

91
DLITE
Programming Lighting Objects
To move a range of lighting objects
Example: Move object 1  3 to object 11  13.
1 Press
SHIFT + MOVE.
2 To move scenes: Press
SCENE and press 1  3.
To move cues: Press
QLIST and select the QList. Then press CUE and press 1  3.
To move chase steps: Press
CHASE and select the chase. Then press STEP and press 1  3.
3 Press
@.
4 Press
11 on the keypad and press ENTER or STORE.
Or
Tap cell 11 on the touch screen.
5 Press
11 on the keypad.
Lighting objects 1  3 are renumbered as lighting object 11  13.
Note: Confirmation is requested when overwriting.
6 If confirmation is requested, press
ENTER or STORE.
Deleting lighting objects
To delete lighting objects
Example: Delete object 1.
1 Press
DELETE.
2 To delete scenes: Press
SCENE and press 1.
To delete cues: Press
QLIST and select the QList. Then press CUE and press 1.
To delete chase steps: Press
CHASE and select the chase. Then press STEP and press 1
3 Press ENTER or DELETE.
Note: Confirmation is requested when deleting.
4 Press
ENTER, or DELETE, or tap OK again.
The selection is deleted.
Adding text tags to lighting objects
Giving meaningful text tags to lighting objects makes it easy to identify them. Text tags are
displayed on the touch screen in the scene’s, cue’s, or chase step’s cell, and in the playback area on
the external monitor when the lighting object is loaded on a playback.
To add text tags to lighting objects
Example: Add a text tag to lighting object 1.
1 To add text tags to scenes: Press
SCENE and press 1.
To add text tags to cues: Press
QLIST and select the QList. Then press CUE and press 1.