121
DLITE
Show and Device File Management
Loading shows
You can view shows saved on the flash or on a USB stick, on the touch screen data grid. Show file
names are also shown on the external monitor’s playback display. Select the show to load by
tapping the show on the touch screen or pressing the UK that corresponds to the show number.
There are three load options:
Entire show
Partial loading
Merge shows
Use the page wheel or arrow up/arrow down to view shows not visible on the first screen.
Loading all show data
Load all show data, which includes the patch and all show objects.
To load shows from the flash disk
Example: Load show 10.
1 Press
SETUP.
2 Tap
LOAD on the touch screen.
3 Select the show by tapping it on the touch screen or pressing the UK that corresponds to the
show number.
4 Tap
LOAD.
When the show is loaded the message
Load Successful is displayed.
Tip! Double click the show file to load it.
To load shows from a USB stick
Example: Load show 10.
1 Connect the USB stick.
2 Press
SETUP.
3 Tap
LOAD on the touch screen.
4 Tap
USB DRIVE.
The contents of the USB stick are displayed.
5 Select the show.
6 Tap
LOAD.
When the show is loaded the message
Load Successful is displayed.
To Next Page
Loading...