163
Chapter 12 System Setup and Operations
This chapter includes:
About the setup screen (see page 163)
System options (see page 164)
Connecting to a PC (see page 169)
Clearing all data on start up (see page 169)
About the setup screen
The setup screen is the portal to some basic system functions and system configuration.
Setup screen menus:
Access the system options.
Shut down the application.
Access diagnostics for panel hardware.
Manage In/Out protocols - SMPTE and MIDI
Load - Load a show from the flash disk or a USB stick. See “Loading shows” on page 120.
Save a show to the flash disk or a USB stick. Saving shows (see page 119).
Delete - Delete a show from the flash disk or a USB stick.
Delete Device - Delete devices from the flash disk or a USB stick. See “Deleting devices” on
page 123.
Access the patch menu. See “Patching” on page 17.
View and edit DMX address assignments. This is also available as a submenu under Patch.
View and edit DMX channel properties. This is also available as a submenu under Patch.See
“DMX channel properties” on page 26.
To access the setup screen
Press SETUP.
To Next Page
Loading...