129
DLITE
Effects
Fixture selection order
The order in which fixtures are selected determines the order in which the effect is executed.
Example: If the spot selection was 1 12, spot 1 is the first spot to respond, spot 2 is the next, etc.
If the spot selection was 12 1, spot 12 is the first spot to respond, spot 11 is the next, etc. This is
also true for non-sequential spot selections.
Generic effects
Dlite is supplied with generic effects. All generic effects attributes can be modified. Note that some
of the generic effects are pre-programmed to run on specific parameters, such as Cyan Mag that
runs on the cyan and magenta parameters. You can also build your effects from scratch using the
movement types and attributes that are available in the
Effect screen.
Generic effects range from effect 49 through effect 68.
.
To use generic effects
1 Press
SPOT and select fixtures.
2 Press
EFFECT.
3 Choose an effect by tapping it on the touch screen.
The effect starts running immediately.
Movement attributes
Effects’ movement attributes are:
Generic or Customize
Base
Up, Down, Center
Size
Dlite is supplied with 20 pre-programmed effects. Pre-programmed effects start at number 49.
49. Circle 54. Triangle 59. Cyan Mag(enta)
Yel(low)
64. Iris Pulse
50. Scan 55. Square 60. Dim On Of 65. Foc(us) Fade
51. Fly Out 56. Cyan Mag(enta) 61. Dim Fade 66. Zoom Fade
52. Scissor 57. Mag(enta)
Yel (l ow)
62. 3 Circ(le)
Shadow
67. Frost Fade
53. Spiral 58. Cyan Yel(low) 63. Iris Fade 68. Frost Pulse
To Next Page
Loading...