Compulite Dlite - Controlling Fade Rates on the Crossfader; Examining Cues Running on the Crossfader

110
Compulite
Chapter 6
To fade to a cue out of sequence in cue time
1 Select the cue number.
2 Press
GO.
The selected cue fades according to its stored time.
To fade to a cue out of sequence ignoring cue time
1 Select the cue number.
2 Press
SHIFT + GO.
The selected cue fades according to system time. see “Defaults” page 165.
To pause a cue
Press HOLD.
To restart a paused fade
Press GO.
To return to the previous cue
Press BACK.
Controlling fade rates on the crossfader
Use the rate key to access rate control for the crossfader.
To control the fade rate on the crossfader
1 Press
RATE.
2 Press
SELECT (A/B).
3 Use the
RATE wheel to control the fade speeds on the crossfader.
Examining cues running on the crossfader
Exam displays appear on the external monitor and are color coded. (see “Examining objects”
page 96).
To examine cues running on the crossfader
1 Press
CUE.
The QList on the crossfader is automatically selected.
2 Optional: Select the cue number.
Note: If a specific cue is not selected, the contents of the first cue are displayed.
3 Tap
EXAM.
The contents of the selected cue are displayed.
4 Navigate through the cues by pressing
NEXT and PREV.