130
Compulite
Chapter 9
Customize
You can customize the effect’s basic movement pattern. Different effect types can be assigned to
each parameter. Combining effect types is a quick way to create complex effects.
Other basic types, accessed by tapping
MORE..., are:
Cos(ine)
Trpz (trapezoid)
Tri(angle)
Hold
SprlX (spiral on the pan axis)
SprlY(spiral on the tile axis)
Saw
Note: When no parameter is selected, the effect screen opens to the
Generic effects. If
you have selected a parameter, the screen opens to
Customize effects.
To set a movement type
Example: Set the jump movement type for the dimmer parameter for moving lights 1 through
6.
1 Select moving lights 1 through 6.
2 Press the dimmer wheel to select the dimmer parameter.
Or
Set a base dimmer level.
3 Press
EFFECT.
4 Tap
JUMP.
The effect begins working immediately.
Base
Base is the parameter level that defines the effect’s starting point. Base level are parameter and spot
specific. Set the base level prior to accessing the
Effect Editor screen. When the effect is running,
the wheel labelled with the last parameter selected can be used to change the base level.
Movement type What it does
None No effect is running.
Jump The parameter level jumps from the base to FL and jumps back to the
base.
Fade The parameter level fades from the base to FL and fades back to the base.
Pulse The parameter level fades from the base to FL, pauses, fades back to the
base, and pauses again before repeating.
To Next Page
Loading...