Compulite Dlite - Copying Effect Libraries; Deleting Effect Libraries

139
DLITE
Effects
8 Press EFFECT and choose an effect number.
9 Press
ENTER.
When this effect starts running it will always start from the stored base level.
Copying effect libraries
You can copy effect libraries to new effect libraries and then edit the new libraries, changing the
look of the effect.
To copy an effect library
Example: Copy effect 2 (source) to effect 6 (target).
1 Press
COPY.
2 Press
EFFECT and select effect 2.
3 Press
@.
4 Select effect 6.
5 Press
ENTER, or STORE.
Effect 6, a copy of the effect 1, is stored.
Note: Confirmation is requested when overwriting.
6 If confirmation is requested, press
ENTER, or STORE, or tap OK again.
To move an effect library
Example: Move effect 2 (source) to effect 6 (target).
1 Press
SHIFT + MOVE.
2 Press
EFFECT and select effect 2.
3 Press
@.
4 Select effect 6.
5 Press
ENTER or STORE.
6 Press
ENTER, or STORE, or tap OK.
Effect 1 is renumbered as effect 6.
Note: Confirmation is requested when overwriting.
7 If confirmation is requested, press
ENTER, or STORE, or tap OK again.
Deleting effect libraries
You can delete a single effect.
To delete an effect
Example: Delete effect 4.
1 Press
DELETE.
2 Press
EFFECT.