Compulite Dlite - Working with Groups; Storing Groups

50
Compulite
Chapter 3
Groups are collections of frequently used fixture selections. Groups can be combined and manipu-
lated like all other selection sequences. Dlite supports 108 groups. 60 groups are operator defined,
24 generic system generated groups, and up to 24 groups for devices.
Dlite automatically creates fixture groups according to the patched devices. Groups that are auto-
matically generated by the system cannot be edited or updated. They are, however, automatically
updated when fixtures are deleted from or added to the patch.
Working with groups
Groups can be stored, updated, copied, and deleted.
Storing groups
Groups can contain any number of fixtures and fixture types.
To store groups
1 Select fixtures using any selection sequence.
2 Press
STORE.
3 Press
GROUP and enter a number on the numeric keypad.
4 Press
ENTER.
The group is stored.
OR
1 Select fixtures using any selection sequence.
2 Press
STORE.
Auto Group # Auto Group
61 All Chns (channels)
62 Even Chns (channels)
63 Odd Chns (channels)
64 3rd Chns (every third channel)
66 All spots
67 Even spots
68 Odd spots
69 3rd spots
from 70 One group for each device type.
Example:
Group 70 - Channel
Group 71 - VL2500
Group 72 - Channel + Scroller